Performing Manual Sensor Calibration
Performing Manual Sensor Calibration

Performing Manual Sensor Calibration

You may need to manually calibrate the printer if you see issues with the print output.
  1. Touch
    Print
    Sensors
    Manual Calibration
    .
  2. Touch
    Start Calibration
    .
  3. Follow the steps in the calibration procedure as prompted.
    Follow the calibration procedure exactly as presented.
    • Touch
      Next
        to advance to the next prompt.
    • You may press and hold
      CANCEL
       on the control panel at any step in the procedure to cancel the calibration process.
  4. When calibration is complete, press
    PAUSE
     to exit pause mode and enable printing.