Running the Printer Installation Wizard

On the last screen of the driver installer, leave

Run the Printer Installation Wizard

checked, then click

Finish

The Printer Installation wizard displays.

Click

Install Printer Driver

The license agreement displays.

Read and accept the terms of the license agreement, then click

Select the communication option that you want to configure for your printer:

Network Port—To install printers with an Ethernet (LAN) or wireless (Wi-Fi) network connection. Wait for the driver to scan your local network for devices and follow the prompts. If necessary, set the values as directed in Connecting to Your Network through the Printer's Ethernet Port or in Connecting the Printer to Your Wireless Network.

USB Port—To install printers connected with the USB cable. Connect the printer to the computer as shown in Connecting the Printer to a Computer Using a USB Port. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.

Bluetooth Port—To install printers with a Bluetooth connection.

Other—To install using another type of cable, such as Parallel (LPT) and Serial (COM). No additional configuration is necessary. See Connecting to a Computer Using the Printer's Serial or Parallel Port.

If prompted, select your printer model and resolution.

The model and resolution are on the part number sticker on the printer, usually located below the media hanger. The information will be in the following format:

Part Number: XXXXXxY – xxxxxxxx

where

XXXXX

= the printer model, and

= the printer resolution (

= 203 dpi,

= 300 dpi,

= 600 dpi).

For example, in the part number

ZT610x6 – xxxxxxxx

ZT610

indicates that the printer is a ZT610 model, and

indicates that the maximum printhead resolution is 600 dpi.