1. Zebra Integrated Multifunction Light Product Reference Guide
  2. Technical Reference
  3. Pin Out Diagrams
  • Zebra Integrated Multifunction Light Product Reference Guide
Pin Out Diagrams

Pin Out Diagrams

The following diagrams provide pin-out information for the Power and IO Y cable for FS80 Fixed Industrial Scanners.

Power and IO Y Cable (FS80)

Power and IO Y Cable Pin Out Diagram
Flying Leads Color (24 AWG)
Function
Green
Green must be connected to -VDC to operate the Zebra Integrated Multifunction Light.
OUT_COMMON
Brown
Not in Use
Yellow
OUT2
Red
+VDC
Grey
IN3
White/Violet
IN_COMMON
Violet
IN5
White/Yellow
IN6
White/Brown
IN4
Black
-VDC
Orange
PASS_OUT
Blue
FAIL_OUT
White/Green
RESERVED_PROG

8-Pin A-Coded Male Input Connector on Zebra Integrated Multifunction Light

8-Pin A-Coded Male Input Connector Pin Out Diagram
Pin
Signal
Description
1
VDC+
The positive power terminal (24V relative to VDC-)
2
FAIL_OUT_NPN
The pulse output from the light that is triggered when a FAIL command is sent on CONFIG_IN (+24V relative to OUTPUT-)
3
INPUT- (COMMON_IN)
The low side reference for the input signals to the light.
4
STROBE_IN_NPN
The strobe pulse input to the light (+24V relative to INPUT-)
5
CONFIG_IN
The command/configuration pulse input to the light (+24V relative to INPUT-)
6
OUTPUT- (COMMON_OUT)
The low side reference for the light's output signals. The user provides the voltage of OUTPUT-.
7
PASS_OUT_NPN
Pass the output from the light that is triggered when a PASS command is sent on CONFIG_IN (+24V relative to OUTPUT-).
8
VDC-
Negative power terminal.