Specification | Description |
|---|---|
Physical Characteristics | |
Dimensions | 151.86 mm L x 151.86 mm W x 65.01 mm D |
Weight | 3.3 lbs (1.5 kg) |
Performance Characteristics | |
Electrical Input | 24 VDC +/- 5% |
Input Current | White: 1.25 A average max. Red 1.10A average max Infrared: 0.95A average max Peak 2.4 A charge rate |
Input Power | White: 30W max. Red: 26.5W max. Infrared: 23W max. |
PNP Trigger | 2 mA @ 4 VDC 7 mA @ 12 VDC 13.4 @ 24 VDC |
NPN Trigger | 9.9 mA @ Common (0VDC) |
Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output) 24 VDC (Max) |
Strobe Duration | Deca OverDrive: Min. 25 µs, max. 1 ms Standard OverDrive: Beginning at 1 ms, max. 4 ms |
Strobe Trigger Latency | 10 µs opto turn on plus 6 µs driver latency |
Strobe Frequency | Max 1.6kHz or Max Duty Cycle/Strobe Duration as calculated, whichever is less |
Duty Cycle | 4% |
Fan Angles (Full Width at Half Maximum) | 21°, 42°, 60° and 78° |
Audio Annunciator | Volume levels: 80dB, 77dB, and 74dB at 1meter Tones: 2673Hz, 3000Hz, or 3367Hz Duration: 30ms, 60ms, or 90ms |
User Environment | |
Operating Temperature | 0°C to 45°C (32°F to 113°F) 0 to 95% RH (non-condensing) humidity |
Storage Temperature | -40°C to 70°C (-40°F to 158°F) 0 to 85% RH (non-condensing) |
Vibration Resistance | EN 60068-2-6, 14 mm @ 2Hz to 10 Hz 1.5 mm @ 13 Hz to 55 Hz 2g @ 70Hz to 500 Hz 2 hours on each axis |
Shock Resistance | EN 600068-2-27, 30g; 11ms 3 shocks on each axis |
Electrostatic Discharge | ±15kV Air, ±8kV Contact Performance |
