Pairing Using Bluetooth HID

Pairing Using Bluetooth HID

Pair EM45 using Bluetooth HID.
  1. Remove the battery from the scanner.
  2. Replace the battery.
  3. After the scanner reboots, scan the barcode below to place the scanner in HID mode.
    Barcode for HID mode.
  4. On the device, swipe down from the Status bar to open the Quick Access panel and then touch Settings icon..
  5. Tap
    Connected devices
    .
  6. Tap
    Pair new device
    . The device begins searching for discoverable Bluetooth devices in the area and displays them under
    Available devices
    .
  7. Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial number.
    The device connects to the scanner, the scanner beeps once and
    Connected
    appears below the device name. The Bluetooth device is added to the
    Paired devices
    list and a trusted (paired) connection is established.