Pairing in HID Mode Using NFC

Pairing in HID Mode Using NFC

EM45 pairs NFC-capable ring scanners HID Mode using NFC.
  1. Ensure that NFC is enabled on the device.
  2. Ensure that Bluetooth is enabled on both devices.
  3. Ensure that the Bluetooth device to discover is in discoverable mode.
  4. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
  5. Place the Ring Scanner in Human Interface Device (HID) mode. If the Ring Scanner is already in HID mode, skip to step 6.
    1. Remove the battery from the Ring Scanner.
    2. Press and hold the Restore key.
    3. Install the battery onto the Ring Scanner.
    4. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green.
    5. Scan the barcode below to place the Ring Scanner in HID mode.
      Bluetooth HID Barcode
  6. Remove the battery from the Ring Scanner.
  7. Re-install the battery into the Ring Scanner.
  8. Align the NFC icon on the Ring Scanner with the NFC icon on the device.
A notification displays on the device screen and the Image of notification icon. appears in the Status bar.