Use the RS2100 Wearable Scanner to capture barcode data.
Refer to the RS2100 Wearable Scanner Product Reference Guide for more information.
RS2100 Wearable Scanner
Aim the Imager Window at the barcode and press the scan trigger on the Slim Mount.
RS2100 Scanning Barcode
Imager decoding usually occurs instantaneously. When the device is in Picklist mode, the scanner does not decode the barcode until the red crosshair touches the barcode.
Ensure the barcode is within the area formed in the aiming pattern.
The Status LED illuminates red. Upon successful decoding, the Status LED changes from red to green, and an audible beep sounds.