1. EM45 Enterprise Mobile RFID User Guide
  2. Getting Started
  3. Installing the SIM Card
  • EM45 RFID Enterprise Mobile
Installing the SIM Card

Installing the SIM Card

A SIM card or eSIM is required to make calls and transfer data over a cellular network.
The device also offers Dual SIM/Dual Standby (DSDS), which allows users to use an eSIM and SIM card and remain on standby at any time.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.
  1. Pull the card holder out of the device.
    Pulling the SD card holder out.
  2. Flip the card holder over.
    Flip cardholder over to expose SIM card placement.
  3. Place the SIM card end, with contacts facing up, into the card holder.
    Placing SIM card in with contacts facing up.
  4. Press the SIM card down into the card holder and ensure that it seats properly.
  5. Flip the cardholder over and re-install the card holder.
    Reinstall cardholder.