1. TC52 Product Reference Guide
  2. Accessories
  3. 1-Slot Workstation Docking Cradle
  4. Ethernet Settings
  5. Configuring Ethernet Static IP Address
  • TC52 Touch Computer Product Reference Guide
Configuring Ethernet Static IP Address

Configuring Ethernet Static IP Address

The device includes Ethernet cradle drivers. After inserting the device, configure the Ethernet connection.
  1. Swipe down from the Status bar to open the Quick Settings bar and then touch settings icon.
  2. Touch Ethernet.
  3. Slide the switch to the
    ON
     position.
  4. Place the device into the Ethernet cradle slot.
  5. Touch
    eth0
    .
  6. Touch
    Disconnect
    .
  7. Touch
    eth0
    .
  8. Touch the
    IP
     settings drop-down list and select Static.
  9. In the
    IP address
     field, enter the proxy server address.
  10. If required, in the
    Gateway
     field, enter a gateway address for the device.
  11. If required, in the
    Netmask
     field, enter the network mask address.
  12. If required, in the
    DNS
     address fields, enter a Domain Name System (DNS) addresses.
  13. Touch
    CONNECT
    .
  14. Touch the Home button.