Battery Manager Information Tab

Section Title

Level
- The current battery charge level as a percentage. Displays -% when the level is unknown.
Wear
- The health of the battery in graphical form. When the wear level exceeds 80%, the bar color changes to red.
Health
- The health of the battery. If a critical error occurs, appears. Touch to view the error description.
Decommission
- The battery is past its useful life and should be replaced. See system administrator.
Good
- The battery is good.
Charge error
- An error occurred while charging. See system administrator.
Over Current
- An over-current condition occurred. See system administrator.
Dead
- The battery has no charge. Replace the battery.
Over Voltage
- An over-voltage condition occurred. See system administrator.
Below Temperature
- The battery temperature is below the operating temperature. See system administrator.
Failure Detected
- A failure has been detected in the battery. See system administrator.
Unknown
- See system administrator.
Charge Status
Not charging
- The device is not connected to AC power.
Not charging
- The device is not charging.
Charging-AC
- The device is connected to AC power and charging or is fast charging via USB.
Charging-USB
- The device is connected to a host computer with a USB cable and charging.
Discharging
- The battery is discharging.
Full
- The battery is fully charged.
Unknown
- The battery status is unknown.
Time until Full
- The amount of time until the battery is fully charged.
Time since charging
- The amount of time since the device began charging.
Time until empty
- The amount of time until the battery is empty.
Advanced info
- Touch to view additional battery information.
Advanced info
- Touch to view additional battery information.
Battery present status
- Indicates that the battery is present.
Battery level
- The battery charge level as a percentage of scale.
Battery scale
- The battery scale level used to determine battery level (100).
Battery voltage
- The current battery voltage in millivolts.
Battery temperature
- The current battery temperature in degrees Centigrade.
Battery technology
- The type of battery.
Battery current
- The average current into or out of the battery over the last second in mAh.
Battery manufacture date
- The date of manufacture.
Battery serial number
- The battery serial number. The number matches the serial number printed on the battery label.
Battery part number
- The battery part number.
Battery decommission status
- Indicates if the battery is past its life span.
Battery Good
- The battery is in good health.
Decommissioned Battery
- The battery is past its useful life and should be replaced.
Base cumulative charge
- Cumulative charge using Zebra charging equipment only.
Battery present capacity
- Maximum amount of charge that could be pulled from the battery under the present discharge conditions if the battery were fully charged.
Battery health percentage
- With a range from 0 to 100, this is the ratio of “present_capacity” to “design_capacity” at a discharge rate of “design_capacity”.
% decommission threshold
- The default % decommission threshold for a gifted battery as 80%.
Battery present charge
- Amount of usable charge remaining in the battery at present under the current discharge conditions.
Battery total cumulative charge
- The total accumulated charge in all chargers.
Battery time since first use
- The time passed since the battery was placed in a Zebra terminal for the first time.
Battery error status
- The error status of the battery.
App version
- The application version number.