1. TC52 Product Reference Guide
  2. Applications
  3. Camera
  4. Photo Settings
  5. Android 11 Rear Camera Photo Settings
  • TC52 Touch Computer Product Reference Guide
Android 11 Rear Camera Photo Settings

Android 11 Rear Camera Photo Settings

  • Flash
     - Select whether the camera relies on its light meter to decide whether a flash is necessary, or to turn it on or off for all shots.
    Icon
    Description
    Flash off icon
    Off
     - Disable flash.
    Flash auto icon
    Auto
     - Adjust flash automatically depending upon light meter (default).
    Flash on icon
    On
     - Enable flash upon taking a photo.
  • Picture size
     - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M pixels, HD 1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
  • Picture quality
     - Set the picture quality setting to: Low, Standard (default) or High.
  • Countdown timer
     - Select Off (default), 2 seconds, 5 seconds or 10 seconds.
  • Storage
     – Set the location to store the photo to: Phone or SD Card.
  • Continuous Shot
     - Select to take a series of photos quickly while holding the capture button. Off (default) or On.
  • Face Detection
     - Set the camera to automatically adjust the focus for faces.
  • ISO
     - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800 or ISO1600.
  • Exposure
     - Set the exposure settings to: +2, +1, 0(default), -1 or -2.
  • White balance
     - Select how the camera adjusts colors in different kinds of light, to achieve the most natural-looking colors.
    Icon
    Description
    Incandescent setting icon
    Incandescent
     - Adjust the white balance for incandescent lighting.
    Florescent setting icon
    Fluorescent
     - Adjust the white balance for florescent lighting.
    Auto setting icon
    Auto
     - Adjust the white balance automatically (default).
    Daylight setting icon
    Daylight
     - Adjust the white balance for daylight.
    Cloudy setting icon
    Cloudy
     - Adjust the white balance for a cloudy environment.
  • Redeye reduction
     - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
  • ZSL
     - Set the camera to immediately take a picture when the button is pressed (default – enabled).
  • Shutter Sound
     - Select to play a shutter sound when taking a photo. Options: Disable (default) or Enable.
  • Anti Banding
     - Allows the camera to avoid problems caused by artificial light sources that are not constant. These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.