Use the Rack/Wall Mount Bracket to mount a 5-slot cradle on a rack. When installing on a rack, first assemble the bracket and cradles/chargers and then install the assembly on the rack.
Place the power supply in the bottom tray.
Connect the AC line cord to the power supply.
Connect the DC line cord to the power supply.
Secure the power supply and cables to the bottom tray with tie wraps.
Ensure that the tie wrap buckle is on the side of the power supply and not on top. Having the tie wrap buckle on top of the power supply interferes with the top tray.
Route cables through the cable slots.
1
DC line cord
2
Power supply
3
AC line cord
Secure four M2.5 studs to the top tray as shown.
Align and install a 5-Slot cradle onto the studs of the top tray.
Secure cradle to top tray with two M2.5 safety screws.
Slide the top tray onto the bottom tray.
Connect cables to cradle.
Secure the top tray to the bottom tray with 4 M5 screws (two on each side).
