Operating the Device

WS101/WS101-H Product Reference Guide

This section provides an overview of the device's functions and how to perform various actions on the device, such as answering an incoming redialing the last called number.

The top LED is for power and connectivity status notification, while the ring LED on the front of the device is primarily for battery status notifications.

Ensure the device firmware is up to date to maintain accurate LED indicators.

Action	Procedure	Indicators
Answer an incoming call	Press the Power button.	The top and ring LEDs flash green and the device vibrates if vibration is enabled.
Ongoing call	N/A	The top LED is a solid red, while the ring LED blinks red.
End an in progress call and answer a second incoming call	Double press on the Power button.	Both LED transitions from a solid red to indicate the ongoing call and then flash green to indicate the incoming call.
Placing an ongoing call on hold	Press the Power button.	The top LED transitions from a solid red to indicate the ongoing call and then alternates to flashing red and green to indicate a call is on hold.
Switch between held calls	Press the Power button	The top LED transitions from a solid red to indicate the ongoing call and then alternates to flashing red and green to indicate a call is on hold.
End an in progress call	Double press the Power button.	The top and ring LEDs turn off.
Redial the last number dialed	Press both Vol + and Vol - at the same time.	N/A
Increase or decrease the device's volume	Press the Vol + button to increase the volume and the Vol - button to decrease the volume. Volume control keys control the volume of the BT audio stream currently active. When Android touch is enabled, use the device's volume buttons to adjust the system volume. Similar to other Bluetooth speakers or headsets, this can only be done when audio is actively playing through the device. Media (A2DP) volume and in-call (HFP) volume are independent.	N/A
Mute or unmute the microphone	Press the P2 button when on an ongoing call.	The top and ring LED flash orange.
Check battery status	N/A	When the device is not being charged, the battery status displays as a percentage on the ring LED. The fuller the ring, the fuller the battery. If the battery is faulty, the ring LED flashes red.
Remove all previously paired devices	Simultaneously press and hold the Power and both Vol buttons. he device enters pairing mode once it reboots.	The ring LED flashes blue before rebooting.