Connection > Wired > Wired IP Protocol
Connection > Wired > Wired IP Protocol

Connection > Wired > Wired IP Protocol

The wired print server’s IP address can be set by you ("permanent") or be selected by the server ("dynamic"). When a dynamic option is chosen, this parameter specifies the method(s) by which the print server receives the IP address from the server.
You must reset the print server to allow changes to the network settings to take effect. See Connection > Networks > Reset Network.
Accepted values: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, DHCP & BOOTP, PERMANENT
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.protocol
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings