Connection > WLAN > WLAN IP Protocol
Connection > WLAN > WLAN IP Protocol

Connection > WLAN > WLAN IP Protocol

You can set the wireless print server’s IP address ("permanent") or the server can set it ("dynamic") . When a dynamic option is chosen, this parameter tells the method(s) by which this print server receives the IP address from the server.
You must reset the print server to allow changes to the network settings to take effect (see Connection > Networks > Reset Network).
Accepted values: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, DHCP & BOOTP, PERMANENT
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.protocol
Printer web page:
View and Modify Printer Settings
Network Communications Setup
Wireless Setup