Dimensions – ZD421/ZD621 Thermal Transfer Printer Models
Dimensions – ZD421/ZD621 Thermal Transfer Printer Models

Dimensions – ZD421/ZD621 Thermal Transfer Printer Models

All dimensions are in millimeters.
ZD421/ZD621 Thermal Transfer Models – Dimensions for a Standard Printer
All dimensions are in millimeters.
ZD621 / ZD421 Thermal Transfer Models – Dimensions for Printer with the Label Dispenser Option Installed
All dimensions are in millimeters.
ZD421 / ZD621 Thermal Transfer Models –  Dimensions for Printer with Cutter Option Installed
All dimensions are in millimeters.
ZD421 / ZD621 Thermal Transfer Models –  Dimensions for Printer with the External Battery Plugged In
All dimensions are in millimeters.
ZD421 / ZD621 Thermal Transfer Models –  Dimensions for Printer with External Battery Plugged In and with Printer Open
All dimensions are in millimeters
ZD421 / ZD621 Thermal Transfer Models – Dimensions for Printer with Power Supply Base Attached
All dimensions are in millimeters.
ZD421 / ZD621 Thermal Transfer Models – Dimensions for Printer with Power Supply Base Attached and Printer Open
All dimensions are in millimeters.
ZD421 / ZD621 Thermal Transfer Models – Mounting Screw Locations
1
Hardware Reset Access – Provide a 20-25 mm hole in mounting plate or surface to keep this area accessible after the printer is mounted onto a surface.
2
Mounting screw locations – Use M3 thread-forming screws that will fit in the maximum printer base hole depth of 6 mm.
Do NOT remove the rubber feet located on the printer base. They are designed to keep the printer from overheating.