Network (and Bluetooth) Configuration Report
Network (and Bluetooth) Configuration Report

Network (and Bluetooth) Configuration Report

ZD Series printers that have wired or wireless connectivity options installed will print a network configuration report in addition to a printer configuration report during a CANCEL self-test.
You will need the information in this report to establish and troubleshoot Ethernet (LAN and WLAN), Bluetooth 4.1 and Bluetooth LE network printing.
In addition to the CANCEL self test, you can also output this report by sending the
~WL
ZPL  command to the printer.
The report shown below is an example. The contents of the report may vary for your printer model.
1
iOS Support Setting
iOS devices have Bluetooth Classic 4.X (with 3.0 compatibility). When the Wi-Fi and Bluetooth Classic wireless connectivity option is installed in your printer, it is listed as
supported
at the end of the Network (and Bluetooth) Configuration report.
When the wireless connectivity option is NOT installed, the iOS setting is noted at the end of the Network (and Bluetooth) Configuration report as
not supported
.