Resetting Non-Network Printer Configuration Settings to their Factory Defaults
Resetting Non-Network Printer Configuration Settings to their Factory Defaults
Use these instructions to reset the non-network printer settings to their factory defaults.
Turn printer power OFF.
Press and hold
PAUSE
() and
FEED
() simultaneously and turn printer power ON.
Continue holding these buttons until the STATUS indicator () is the only indicator lit.
The printer has a
RESET
button on its underside. See RESET Button Functions in this section for information on how to use this button.
After the non-network printer configuration settings are reset, calibrate the sensor. You can run a SmartCal Media Calibration or, if that is insufficient for your media, manually calibrate the printer for the media you loaded.
) and 
) simultaneously and turn printer power ON.
) is the only indicator lit.