This section describes standard and optional specifications.
Location of Communication Interfaces
1
Wireless port option
2
Wired Ethernet print server (external)
3
USB host port
Wired Ethernet print server (internal)
Serial port
USB 2.0 data interface
You must supply all data cables for your application. The use of cable strain relief clamps is recommended.
Ethernet cables do not require shielding, but all other data cables must be fully shielded and fitted with metal or metalized connector shells. Unshielded data cables may increase radiated emissions above the regulated limits.
To minimize electrical noise pickup in the cable:
Keep data cables as short as possible.
Do not bundle the data cables tightly with the power cords.
Do not tie the data cables to power wire conduits.
