ZT111 Industrial Printer User Guide

Print Specifications

Print resolution		203 dpi (dots per inch) (8 dots/mm)
Print resolution		300 dpi (12 dots/mm)
Programmable constant print speeds (per second)	203 dpi	51 mm to 254 mm in 25.4-mm increments 2.0 in. to 10 in. in 1-in. increments
Programmable constant print speeds (per second)	300 dpi	51 mm to 152 mm in 25.4-mm increments 2.0 in. to 6 in. in 1-in. increments
Dot size (nominal) (width x length)	203 dpi	0.125 mm x 0.125 mm (0.0049 in. x 0.0049 in.)
Dot size (nominal) (width x length)	300 dpi	0.084 mm x 0.099 mm (0.0033 in. x 0.0039 in.)
Maximum print width		104 mm (4.09 in.)
Maximum continuous print length*	203 dpi	3988 mm (157 in.)
Maximum continuous print length*	300 dpi	1854 mm (73 in.)
Barcode modulus (X) dimension	203 dpi	5 mil to 50 mil
Barcode modulus (X) dimension	300 dpi	3.3 mill to 33 mil
First dot location (measured from the inside edge of the media)		2.5 mm ± 1.016 mm (0.10 in. ± 0.04 in. )
Media registration tolerance**	Vertical	± 1 mm (± 0.039 in.) on non-continuous media
Media registration tolerance**	Horizontal	± 1 mm (± 0.039 in.) within a roll of media

* Maximum label lengths are affected by option selections and ﬁrmware overhead.

** Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.