The parameter barcodes in this section configure the scanner/scale for connection to an auxiliary scanner. The auxiliary scanner requires its own configuration, and should be programmed with matching settings found in the auxiliary scanner’s Product Reference Guide.
In addition to these settings the auxiliary scanner must be independently configured as a standalone scanner, as though it were connected directly to a host. An auxiliary scanner connected to a the scanner/scale does not assume its configuration.
For additional information about auxiliary port configuration, see RS-232 Device Port Configuration and the settings for Aux 1/Aux 2 Bauds, Stop Bits, Data Bits, and Parity.
For detailed technical information about the scanner/scale including installation, setting up interfaces, calibrating the scale, and operation refer to the integration guide.
Auxiliary RS-232 scanners should only be attached/detached when the scanner/scale is powered off.
