Scale Display Configuration
View content for :
Platform:

Scale Display Configuration

Parameter #
986
Select
Enable Scale Display Configuration
to enable the pole display port. Scale Display Configuration is disabled by default.
  • Enable Scale Display Configuration
    : When a pole display is installed and connected to the scanner/scale, the pole display shows weight, and/or additional alphanumeric information associated with the state of the scale. If a pole display is not connected, and
    Enable Scale Display Configuration
    is selected, the 7-segment display scrolls the code U23 indicating that there is a remote Scale Display communication error.
  • *
    Disable Scale Display Configuration
    : Select this parameter when no Scale Display is installed. When a Scale Display is installed and connected to the scanner/scale, the Scale Display remains blank. The Scale Display can be installed and programmed in any mode of operation.
Refer to the Integration Guide for detailed information about the audit trail, scale calibration, and error/warning conditions.
Enable Scale Display Configuration (1)
*Disable Scale Display Configuration (0)