1. MP72 Scanner Scale Barcode Programming Guide
  2. Auxiliary Scanner Barcodes
  3. Auxiliary Scanner Defaults
  • MP72 Scanner Scale Barcode Programming Guide
Auxiliary Scanner Defaults

Auxiliary Scanner Defaults

The following table provides auxiliary scanner connection parameter defaults.
Auxiliary Scanner Defaults
Parameter
Parameter Number
1
SSI Number
2
Default
1124
F8h 04h 64h
Send Unknown as Code 39
N/A
N/A
Zebra Scanner Auto Switch
N/A
N/A
9600
N/A
N/A
8 Data Bits
N/A
N/A
One Stop
N/A
N/A
No Parity
N/A
N/A
Low RTS
1822
F8h 07h 1Eh
Enable
1328
F8h 05h 30h
16/Inherit
6
1331
F8h 05h 33h
3/Inherit
6
1329
F8h 05h 31h
2/Inherit
6
1330
F8h 05h 32h
6/Inherit
6
1332
F8h 05h 34h
16/Inherit
6
1335
F8h 05h 37h
3/Inherit
6
1333
F8h 05h 35h
2/Inherit
6
1334
F8h 05h 36h
6/Inherit
6
1695
F8h 06h 9Fh
Disable
  1. Parameter number decimal values are used for programming via RSM commands.
  2. SSI number hex values are used for programming via SSI commands.
  3. Applies to an attached scanner regardless of whether or not it is connected to the auxiliary 1 port or the auxiliary 2 port. See RS-232 Device Port Configuration.
  4. Setting applies specifically to the Aux 1 port.
  5. Setting applies specifically to the Aux 2 port.
  6. Inherit means the default is based on the device assigned to the auxiliary port (see RS-232 Device Port Configuration).