RS-232 Host-Specific Parameter Settings

MP72 Scanner Scale Barcode Programming Guide
About This Guide
- Notational Conventions
- Icon Conventions
- Service Information
123Scan and Software Tools
- 123Scan
- Advanced Data Formatting
- Multicode Data Formatting
  - Multicode Data Formatting Use
  - MDF for Best Practices
- Preferred Symbol
USB Interface
- USB Parameter Defaults
- USB Device Type
- USB Device Type (continued)
- USB CDC Host Variant
- USB Keystroke Delay
- USB Caps Lock Override
- Scan Disable Mode
- USB Barcodes with Unknown Characters
- USB Convert Unknown to Code 39
- USB Fast HID
- USB Polling Interval
- USB Polling Interval (continued)
- USB Polling Interval (continued)
- Keypad Emulation
- USB Quick Keypad Emulation
- Keypad Emulation with Leading Zero
- USB Keyboard FN1 Substitution
- USB Function Key Mapping
- USB Simulated Caps Lock
- USB Convert Case
- USB Static CDC
- TGCS (IBM) USB Direct I/O Beep
- USB IBM Long Direct I/O
- TGCS (IBM) USB Beep Directive
- TGCS (IBM) USB Barcode Configuration Directive
- TGCS (IBM) USB Specification Version
- IBM Flash Update
- IBM Scanner Generic Management Information
- IBM Scanner Vendor Specific Management Information
- IBM Scale Generic Management Information
- IBM USB Scale Default Response Status
- USB ASCII Character Sets
RS-232 Interface
- RS-232 Parameter Defaults
- RS-232 Host-Specific Parameter Settings
- RS-232 ASCII Character Sets
IBM 468X / 469X Interface
- IBM Parameter Defaults
- IBM Host Parameters
Scale Configuration
- Scale Parameter Defaults
- Legal Scale Units
- Legal Scale Dampening Filter Setting
- Scale Enable
- Scale Reset
- Scale Display Configuration
- Scale Enforce Zero Return
- Scale Beep After Weight Request
- Ignore Scale Pole Directives
- Maximum Initial Zero Setting Range
- Maximum Scale Zeroing Weight Limit
- Weighing Behind Zero Mode
- Scale 5 Digit Directive
User Preferences and Miscellaneous Options
- User Preferences/Miscellaneous Options
- User Preferences
- Miscellaneous Scanner Parameters
Image Capture Preferences
- Image Capture Preferences Parameter Defaults
- Image Capture Preferences Modes and Parameters
Electronic Article Surveillance (EAS)
- EAS Parameter Defaults
- EAS Parameters
Auxiliary Scanner Barcodes
- Auxiliary Scanner Defaults
- Auxiliary Scanner Decode with Unknown Type
- Host Type
  - Zebra Scanner Auto Switch Mode
- Baud Rate
- Baud Rate (continued)
- Data Bits
- Stop Bits
- Parity
- Host RTS State
- USB Auxiliary Ports
- Aux 1 Baud Rate
- Aux 1 Data Bits
- Aux 1 Stop Bits
- Aux 1 Parity
- Aux 2 Baud Rate
- Aux 2 Data Bits
- Aux 2 Stop Bits
- Aux 2 Parity
- Beep on Aux Decode
SSI Interface
- Communication
  - SSI Commands
- SSI Transactions
  - General Data Transactions
    - ACK/NAK Handshaking
  - Decoded Data Transmission
- Communication Summary
- Encapsulation of RSM Commands/Responses over SSI
- Setting SSI Parameters
  - SSI Scanning Sequence Examples
  - SSI Errors While Scanning
- Simple Serial Interface Parameter Defaults
- SSI Host Parameters
- Event Reporting
SNAPI Interface
Symbologies
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN/JAN
- Code 128
- Code 39
- Code 93
- Interleaved 2 of 5 (I 2 of 5)
- Discrete 2 of 5 (D 2 of 5)
  - Set Lengths for Discrete 2 of 5 (D 2 of 5)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Inverse 1D
- GS1 DataBar
- Symbology-Specific Security Features
- Random Weight Check Digits
- 2D Symbologies
- Macro PDF Features
Driver's License Set Up
- Driver’s License Parsing
- Parsing Driver’s License Data Fields (Embedded Driver's License Parsing)
- DL Parsing User Preferences
- Send Keystroke (Control Characters and Keyboard Characters)
  - Control Characters
  - Keyboard Characters
- Parsing Rule Example
Numeric Barcodes
- Numeric Barcodes (continued)
- Numeric Barcodes (continued)
- Cancel
Alphanumeric Barcodes
- Cancel
- Alphanumeric Barcodes
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
ASCII Character Sets
Programming Reference
- Symbol Code Identifiers
- AIM Code Identifiers
Communication Protocol Functionality
- Functionality Supported via Communication (Cable) Interface
Country Codes
- Country Code Barcodes
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
Country Code Pages
- Country Code Page Defaults
- Country Code Page Barcodes
CJK Decode Control
- CJK Control Parameters
- Unicode/CJK Decode Setup with Windows Host
Non-Parameter Attributes
- Model Number
- Serial Number
- Date of Manufacture
- Date of First Programming
- Configuration Filename
- Beeper/LED
- Parameter Defaults
- Beep on Next Bootup
- Reboot
- Host Trigger Session
- Firmware Version
- Scankit Version
Sample Barcodes
- Sample Code 39
- Sample Code 93
- Sample UPC/EAN
- Sample Code 128
- Sample Interleaved 2 of 5
- Sample Chinese 2 of 5
- Sample GS1 DataBar
- Sample PDF417
- Sample Data Matrix
- Sample QR Code
- Sample Aztec
  - Sample Grid Matrix

Parameter	ICL	Fujitsu	Wincor-Nixdorf Mode A	Wincor-Nixdorf Mode B/ OPOS/JPOS
Baud Rate	9600	9600	9600	9600
Parity	Even	None	Odd	Odd
Stop Bits	One	One	One	One
Data Bits	8-bit	8-bit	8-bit	8-bit
Hardware Handshaking	RTS/CTS Option 3	None	RTS/CTS Option 3	RTS/CTS Option 3
Software Handshaking	None	None	None	None
Serial Response Timeout	9.9 Seconds	2 Seconds	None	None
RTS Line State	High	Low	Low	Low = No data to send
Beep On <BEL>	Disable	Disable	Disable	Disable
Transmit Code ID	Yes	Yes	Yes	Yes
Data Transmission Format	Data/Suffix	Data/Suffix	Data/Suffix	Data/Suffix
Prefix	None	None	None	None
Suffix	CR (1013)	CR (1013)	CR (1013)	CR (1013)
In the Wincor-Nixdorf Mode A/B, when CTS is low, scanning is disabled and when CTS is high, scanning is enabled. If you scan Wincor-Nixdorf RS-232 Mode A/B without connecting the scanner to the proper host, it may appear unable to scan. In this case, scan a different RS-232 host type within 5 seconds of cycling power to the scanner.

Parameter	Olivetti	Omron	CUTE	NCR	Datalogic
Baud Rate	9600	9600	9600	9600	9600
Parity	Even	None	Even	Odd	Odd
Stop Bits	One	One	One	One	One
Data Bits	7-bit	8-bit	7-bit	7-bit	7-bit
Hardware Handshaking	None	None	None	None	None
Software Handshaking	ACK/NAK	None	None	None	None
Serial Response Timeout	9.9 Seconds	9.9 Seconds	9.9 Seconds	9.9 Seconds	9.9 Seconds
RTS Line State	Low	High	High	High	High
Beep On <BEL>	Disable	Disable	Disable	Disable	Enable
Transmit Code ID	Yes	Yes	Yes	Yes	Yes
Data Transmission Format	Prefix/Data/ Suffix	Data/Suffix	Prefix/Data/ Suffix	Prefix/ Suffix	Data/Suffix
Prefix	STX (1002)	None	STX (1002)	STX	None
Suffix	ETX (1003)	CR (1013)	CR (1013) ETX (1003)	ETX	CR (1013)
The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE, scan Enable Parameter Barcode Scanning, and then change the host selection.