The length of a code refers to the number of characters (for example, human-readable characters), including check digit(s) the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range. The default is
One Discrete Length (14)
.
Length ranges: L1 is 0-55; L2 is 0-55.
When setting lengths, enter a leading zero for single digit numbers.
One Discrete Length - Decode only I 2 of 5 symbols containing a selected length.
Two Discrete Lengths - Decode only I 2 of 5 symbols containing either of two lengths.
Length Within Range - Decode I 2 of 5 symbols with a specific length range.
Any Length - Decode I 2 of 5 symbols containing any number of characters within the scanner’s capability.
Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the barcode. To prevent this, select specific lengths (I 2 of 5 - One Discrete Length, Two Discrete Lengths) for I 2 of 5 applications, or increase the Security Level.
Select lengths using barcodes in Numeric Barcodes. To correct an error or change the selection, scan Cancel.
For example:
To decode only I 2 of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, and then scan 1, 4.
To decode only I 2 of 5 symbols containing either 2 or 14 characters, scan I 2 of 5 - Two Discrete Lengths, and then scan 0, 2, 1, 4.
To decode I 2 of 5 symbols containing between 4 and 12 characters, scan I 2 of 5 - Length Within Range, and then scan 0, 4, 1, 2.
