The user can remove the Solid State Drive (SSD) to protect data and replace it or replace it with a new SSD.
For proper electrostatic discharge (ESD) precautions to avoid damaging the SSD. Proper ESD precautions include but are not limited to, working on an ESD mat and ensuring that the user is properly grounded.
Power off the tablet.
Place the tablet on a mat or cloth to protect the display.
Slide the battery release latches toward the sides of the tablet.
The battery ejects slightly.
Lift the battery out of the tablet.
Using your thumbs, push up on the SSD cover.
Push the locking tab (1) up and gently lift the SSD tab (2).
Remove the SSD from the connector on the board.
Align the replacement SSD with the connector on the board.
Push the SSD into the connector.
Press the SSD down until it snaps into place.
Align the SSD cover with the back of the tablet.
Press the SSD cover down.
Insert the battery, bottom first, into the battery compartment at the back of the device.
Press the battery down into the compartment until the release latches snap into place.
