ET6x Enterprise Rugged Tablet Product Reference Guide

Battery True Hot Swap Recommendations

to ensure a successful hot swap.

User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc., could be affected. DO NOT put any labels, asset tags, engravings, stickers, etc., in the battery well.

Do not add or remove a microSD card during battery replacement.

Ensure the following before performing a True Hot Swap:

This Backup Power icon (1) indicates that the backup power is not ready. Issues may include: Super Cap is not fully charged, extreme temperature conditions, or successive battery swap implemented.

Set the Display Backlight Brightness level to 50%.

Set the Media Volume to 50% while on a voice call.

If enabled, turn off Time of Flight (TOF) until the True Hot Swap is complete.

If the Camera application is in use, turn off the application until True Hot Swap is complete.

If the Video Call is in an active session, turn off the video application (voice may be continued) until True Hot Swap is complete.