1. ET6x Product Reference Guide
  2. Getting Started
  3. Replacing the microSD Card
  • ET6x Enterprise Rugged Tablet Product Reference Guide
Replacing the microSD Card

Replacing the microSD Card

When replacing the micoSD card, follow the shutdown instructions to ensure that the data is not corrupted.
To replace the microSD card:
  1. Press the Power button until the menu appears.
  2. Touch
    Power off
    .
  3. Touch
    OK
    .
  4. Press the two battery latches in.
  5. Lift the battery from the device.
  6. Lift the access door.
  7. Remove microSD card from the holder.
  8. Insert the replacement microSD card.
  9. Access door must be replaced and securely seated to ensure proper device sealing.
  10. Replace the access door.
  11. Insert the battery, bottom first, into the battery compartment in the back of the device.
  12. Press the battery down until the battery release latches snap into place.
  13. Press and hold the Power button to turn on the device.