1. ET6x Product Reference Guide
  2. Wireless
  3. Wireless Local Area Network
  4. WLAN Configuration
  5. Configuring the Device to Use a Static IP Address
  • ET6x Enterprise Rugged Tablet Product Reference Guide
Configuring the Device to Use a Static IP Address

Configuring the Device to Use a Static IP Address

By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet protocol (IP) address when connecting to a wireless network.
  1. Go to
    Settings
    .
  2. Touch
    Network & Internet
    Wi-Fi
    .
  3. Touch
    Network & Internet
    .
  4. On Android 11, touch
    Wi-Fi
    .
  5. On Android 13, touch
    Internet
    .
  6. Slide the Wi-Fi switch to the
    On
     position.
  7. In the network dialog box, select and touch a network.
  8. If configuring the connected network, touch to edit the network details and then touch the down arrow to hide the keyboard.
  9. Touch
    Advanced options
    .
  10. Touch
    IP settings
     and select
    Static
    .
  11. In the
    IP address
     text box, enter an IP address for the device.
  12. If required, in the
    Gateway
     text box, enter a gateway address for the device.
  13. If required, in the
    Network prefix length
     text box, enter the prefix length.