Installing Stylus with Hand Strap
Installing Stylus with Hand Strap

Installing Stylus with Hand Strap

  1. Insert one of the loop ends of the tether through the hole in the stylus.
    Image of installing tether to stylus.
  2. Feed the tether through the loop.
    Image of installing tether to stylus.
  3. Pull the tether until the loop tightens.
  4. Insert the loop into the top hand strap clip.
    Image of tethering stylus to handstrap before installing handstrap on device.
  5. Feed the stylus attached to the tether through the tether loop and tighten.
    Image of tethering stylus to handstrap before installing handstrap on device.
  6. Attach the hand strap to the device. See Basic Hand Strap.
  7. Insert the stylus into the stylus holder on the hand strap when not in use.
    Image of stylus inserted into the hand strap stylus tab.