Scanning with Internal Imager
Scanning with Internal Imager

Scanning with Internal Imager

Use the internal imager to capture barcode data.
  1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
  2. Point the exit window of the device at a barcode.
    Image of scanning a barcode.
  3. Press and hold the scan button. The red laser aiming pattern with red aiming dot turns on to asset in aiming.
  4. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
  5. SE4720 Aiming Pattern
    SE55 Aiming Pattern
    SE4720 Aiming for Pick List Mode with Multiple Barcodes
    SE55 Aiming for Pick List Mode with Multiple Barcodes
    When the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.
    The Data Capture LED light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
  6. Release the trigger.
    The barcode content data appears in the text field.
The SE55 displays the green dash-dot-dash aimer. The SE4720 imager displays a red aimer.