1. KC50 Product Reference Guide
  2. Getting Started
  3. Setting up the Device
  4. Mounting the KC50
  • Kiosk Computer Product Reference Guide
Mounting the KC50

Mounting the KC50

The VESA-compliant mounting inserts on the back of the device allow you to mount the device in different ways based on your floor plan and system configuration.
The device includes M4 threaded inserts spaced in 75 mm (2.95 in.) and 100 mm (3.94 in.) squares. You can mount the device onto a VESA mounting plate or create mounting holes in a wall, cabinet, or desk to secure the device in place.
  • Use the correct hardware to mount the device.
    Kiosk Computer Stand
    Refer to the SC-2000 Installation Guide. Use the included M4 screws to secure the device to the stand.
    VESA mounting plate
    Use the included M4 screws to secure the device to the VESA plate.
    Other
    Use M4 screws long enough to secure the device to your mounting solution.
    The device should only be mounted by a trained professional to avoid the risk of fall injury.
  • If you are not using the SC-2000 stand as a mounting solution, use good cable management practices to keep the cables inserted in the device. Use cable ties or hook and loop ties to secure the cables and prevent them from disengaging from the device.
  • If you are attaching the Z-Flex scanner to the device, mount the device so that barcodes are comfortably placed 8 to 20 cm (3 to 8 in.) below the scanner.