1. Resonate RFID Reader Management User Guide
  2. About This Guide
  3. Workflow
  • Resonate RFID Reader Management 2.0 User Guide
Workflow

Workflow

This section provides an overview of the
Resonate RFID Reader Management
 workflow.
  1. Install
    Resonate RFID Reader Management
    ; refer to the software installation guide.
  2. Launch the
    Resonate RFID Reader Management web interface
     from your web browser and log in, as described in Launching the Web Interface.
  3. Set up access for the different users of your
    Resonate RFID Reader Management
     instance, as described in Creating a User.
  4. Add one or more sites where your RFID readers are located, and then upload site maps to each site, as described in Sites and Maps.
  5. Enable communication between
    Resonate RFID Reader Management
     and your RFID readers, as described in Enabling Communication with the RFID Readers .
  6. Configure your RFID readers, as described in Device Configuration Overview.
    When configuring several RFID readers with the same configuration, you can create and use a template for initial configuration, as described in Templates.
  7. Activate your RFID readers, and then connect to them to receive to their tag read data as described in Connecting to RFID Readers to Get Tag Read Data.
  8. Monitor and manage your RFID readers, as described in Monitoring Device Health and Status and RFID Reader Commands and Actions.