Using a Template to Configure Multiple Selected RFID Readers

Resonate RFID Reader Management 2.0 User Guide

The following describes how to use a template to configure multiple selected RFID readers with the same basic configuration at the same time.

To configure a single RFID reader using a template, refer to Using a Template to Configure a Single RFID Reader.

Navigate to

Infrastructure

Devices

Select the RFID readers to configure.

The RFID readers must be of the same type and model. You can use the filters in the left panel to display only RFID readers of a specific type and model; then, click the checkbox in the selector column header to select all displayed RFID readers

Select

Device Settings

Apply Template

in the device settings column header.

The

Select Template

window is displayed.

Select the required template and click

Apply

This updates the selected RFID readers with only the filled-in template fields. The

Devices

window is displayed again, and a message displays the operation status and the number of RFID readers updated.

After basic configuration using the template, access the settings of the individual RFID readers using

Device Settings

Edit

at the far right of the reader's row, and configure the remaining fields appropriately.