1. Resonate RFID Reader Management User Guide
  2. Templates
  3. Using a Template to Configure a Single RFID Reader
  • Resonate RFID Reader Management 2.0 User Guide
Using a Template to Configure a Single RFID Reader
View content for :
Platform:

Using a Template to Configure a Single RFID Reader

The following describes how to use a template to configure a single RFID reader.
To configure multiple selected RFID readers at once using a template, refer to Using a Template to Configure Multiple Selected RFID Readers.
  1. Navigate to
    Infrastructure
    Devices
    .
  2. Select Device Settings
    Device Settings
    Edit
     at the far right of an RFID reader's row.
    The
    Edit Device
     window is displayed.
  3. On the
    Identity
     tab, select the required template, and click
    Apply
    .
    Identity Tab
    Screenshot of the Identity tab.
    This updates the different tabs with the filled-in template fields. If you previously modified other fields on the different tabs and clicked
    Save
    , these other fields are not modified. If you did not save your changes, the template might reset them.
  4. On the remaining tabs, fill in the appropriate fields.
    If necessary, you can modify template-filled fields.
  5. Click
    Save
    .
The RFID reader is configured with the settings of the different fields.