1. MC3400/MC3450 Product Reference Guide
  2. Application Deployment
  3. Android Development Tools
  4. ADB USB Setup
  5. Enabling USB Debugging
  • MC3400/MC3450 Mobile Computer
Enabling USB Debugging

Enabling USB Debugging

By default, USB debugging is disabled
Ensure that you have Developer Options enabled. Go to Enabling Developer Options for more information.
  1. Touch
    System
    Developer options
    .
  2. Slide the
    USB debugging
     switch to the
    On
     position.
    The
    Allow USB debugging?
     message displays on the device.
  3. Touch
    OK
    .
  4. Connect the device to the host computer using the rugged charge/USB cable.
    The
    USB debugging connected
     message displays on the device.
    If the device and host computer are connected for the first time, the
    Allow USB debugging?
     dialog box with the
    Always allow from this computer
     check box displays. Select the check box, if required.
  5. Touch
    OK
     or
    Allow
    .
  6. On the host computer, navigate to the
    platform-tools
     folder and open a command prompt window.
  7. Type
    adb devices
    .
    The following displays: 
    List of devices attached          XXXXXXXXXXXXXXX device
    Where XXXXXXXXXXXXXXX is the device number.
    If device number does not appear, ensure that ADB drivers are installed properly.
  8. Touch
    Home
    .