Pairing Using Bluetooth Human Interface Device

Pair the Bluetooth scanner to the device using HID.

To pair the scanner with the device using HID:

Remove the battery from the scanner.

Replace the battery.

After the scanner reboots, scan the barcode below to place the scanner in HID mode.

On the device, swipe down from the Status bar to open the Quick Access panel and then touch

.

Touch

Bluetooth

.

Touch

Pair new device

. The device begins searching for discoverable Bluetooth devices in the area and displays them under

Available devices

.

Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial number.

The device connects to the scanner, the scanner beeps once and

Connected

appears below the device name. The Bluetooth device is added to the

Paired devices

list and a trusted (“paired”) connection is established.