The slot is located within the battery compartment and is found after removing the battery. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use.
Only use a nano SIM card. The SD/SIM card drawer can hold either two SIM cards or one SIM card and one microSD card.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Power the device down before installing or replacing the SIM card.
Slide the battery release latch to the unlock position and hold in the unlock position.
Disengage the battery cover from either the right or left side recess grooves, and let go of the battery release latch.
Hold the battery cover near the right and left side recess grooves and pull the battery cover off.
Remove the battery.
Using your finger, pull out the SD/SIM card drawer.
Remove the SD/SIM card drawer from the device.
Insert or replace the SIM card into the SD/SIM card drawer.
If you are using two SIM cards, insert the second SIM card into the microSD card slot.
Insert the SD/SIM card drawer into the device.
Press the SD/SIM card drawer into the device to ensure it is in securely.
Align the contacts, slide the battery in position on an angle, and insert the battery, top first, into the battery compartment in the back of the device.
Press the bottom of the battery down into the battery compartment.
Insert and align the cover into the bottom latches.
Push the cover down into the top latches, until it snaps into place.
