Tools Setting | Description | |
|---|---|---|
Print Information | Prints a printer configuration label, sensor profile, barcode information, font information, images, formats, two-key report, and network settings. SGD: device.user_vars.display_ wmlsg_printlist |  |
Backlight Timeout | Sets the duration of the LCD backlight in seconds. SGD: display.backlight_on_time |  |
Power Up Action | Set the action for the printer to take during the power-up sequence, for example, no motion, calibrate, etc. SGD: ezpl.power_up_action |  |
Head Close Action | Set the action for the printer to take when you close the printhead, for example, feed, calibrate, etc. SGD: ezpl.head_close_action |  |
Load Defaults | Restore specific printer, print server, and network settings back to the factory defaults. Use care when loading defaults because you need to reload all settings that you changed manually. This menu item is available through two user menus with different default values for each. SGD: ezpl.load_defaults |  |
Label Length Cal | Calibrate the printer to adjust the length of the label. |  |
Diagnostic Mode | Use this diagnostic tool to cause the printer to output the hexadecimal values for all data received by the printer. SGD: device.user_vars.display_ diagnostic_list |  |
ZBI Enabled? | This menu item indicates if the Zebra Basic Interpreter (ZBI 2.0TM.) option is enabled on your printer. If you would like to purchase this option, contact your Zebra reseller for more information. SGD: zbi.key |  |
Password Protect | Select the level of password protection for user menu items. The default printer password is 1234. SGD: display.password.level |  |
