General settings include batch mode, host type, HID keyboard, tag reporting, charging through the terminal (RFID40 and RFID90 UHF RFID handheld readers only), and timeout.
Configurable settings may differ depending on the type of handheld reader in use.
Handheld Reader General Settings
Dynamic Power
– enable or disable the optimization of RFID reader power consumption.
Unique Tag
– enable or disable reporting unique tags.
Off-Mode Timeout
– set the timeout duration.
USB Host Mode Switch
– switch the USB host modes between HID keyboard mode and SSI over CDC mode.
Bluetooth Host Mode Switch
– switch the Bluetooth Host Mode between HID Keyboard Mode and Mfi.
Same Tag Reporting Timeout in HID Mode
– set the same Tag Reporting timeout in HID mode.
Bluetooth Batch Mode
– set auto/enable/disable for Bluetooth Batch Mode.
USB Batch Mode
– set enable/disable for USB Batch Mode.
eConnex Terminal Charge
– set enable/disable for eConnex Terminal Charge.
Key Remapping
– remap the upper and lower triggers to RFID, Sled Scanner, Terminal Scanner, Scan Notification, or No Action. Select the desired functionality under the upper and lower triggers separately.
IOS HID Virtual Keyboard
– set enable/disable for IOS HID Virtual Keyboard.
Bluetooth settings include:
Bluetooth Discovery
– set enable/disable for Bluetooth discovery.
Discoverable Timeout
– enable Bluetooth discovery above to set the Discoverable timeout value.
Reconnect Attempts
– set Reconnect Attempts value.
Beep on Reconnect
– set enable/disable Beep on Reconnect.
Reconnect to the Bluetooth Host
- set the Bluetooth host to Never Attempt Reconnect, Attempt Reconnect on Data, and Attempt Reconnect Immediately.
NTP Server Setting
- set the primary and secondary NTP server name clock settings.
