Use pre-filters to identify tags to compare for tag filtering and determine where tag data is stored.
This feature is available for handheld readers only.
Pre-filtering options include:
Enable Filter
- enable or disable tag pattern pre-options based on standard RFID protocol.
Tag Pattern
- specify the hexadecimal character pattern to compare for tag filtering. Pattern matching is based on the Offset value with a maximum of 64-byte hexadecimal characters.
Target
- indicate which flag shall be affected when pre-filter is applied from the following: SESSION S0, SESSION S1, SESSION S2, SESSION S3, SL FLAG.
Memory Bank
- specify the memory bank to apply the filter as EPC, TID, or User memory.
Action
- indicate whether matching tags assert or de-assert SL (Selected Flag) or set their inventoried flag to A or to B.
