When DHCP is enabled the current values IP/IPV6 address, prefix length, subnet mask, default gateway, and DNS server settings are available. These settings are obtained from the DHCP server and cannot be changed manually.
Ethernet configuration is available on fixed readers only.
FX Reader Ethernet Configuration
When DHCP is off, the following fields are configurable for IPV4:
IP Address
- provide the reader's assigned IP address.
Subnet Mask
- provide the Subnet Mask for the network the reader resides in.
Default Gateway
- provide the Default Gateway for the network the reader resides in.
DNS server
- provide the DNS Server appropriate for the network the reader resides in.
MAC Address
- specify the reader's MAC address.
Domain Search
- specify the search domain appropriate for the reader.
When DHCP is enabled, changes take effect after setting the properties. When DHCP is disabled, the user must set the appropriate network parameters, and changes take effect after setting the properties.
When DHCP is off, the following fields are configurable for IPV6:
IPV6 Address
- provide the reader's assigned IP address.
Prefix Length
- provide the Prefix Length for the network the reader resides in.
Default Gateway
- provide the Default Gateway for the network the reader resides in.
DNS server
- provide the DNS Server appropriate for the network the reader resides in.
MAC Address
- specify the reader's MAC address.
When DHCP is enabled, changes take effect after setting the properties. When DHCP is disabled, the user must set the appropriate network parameters for changes to take effect after setting the properties.
