LED | Tone Sequence | Description |
|---|---|---|
Standard Use | ||
Green (stays on) | Low/medium/high beeps | Scanner has power. |
(Hands-free) Solid Green LED; turns off after decode. | Medium Beep (or as configured) | Good decode. |
(Handheld) LED is off; green upon decode | ||
Green (blink continuous) | Low beep | Snapshot started. |
Red (stays on) | None | Scanner error. |
Red (blink continuous) | None | Flashing new software. |
Image Capture | ||
Green (blinking) | Low beep | Snapshot mode started. |
Default Green LED based upon hand-held or hands-free mode. | Low beep | Snapshot mode completed. |
Default Green LED based upon hand-held or hands-free mode. | High/low beep | Snapshot mode timed-out. |
Parameter Programming | ||
Red | Long low/long high beeps | Input error; incorrect barcode or Cancel scanned, wrong entry, incorrect barcode programming sequence; remain in program mode. |
Green | High/low beeps | Number expected. Enter value using numeric barcodes. |
Green | High/low/high/low beeps | Successful program exit with change in the parameter setting. |
ADF Programming | ||
None | Low/high/low beeps | ADF transmit error. |
Green | High/low beeps | Number expected. Enter another digit. Add leading zeros to the front if necessary. |
Green | Low/low beeps | Alphanumeric expected. Enter another alphanumeric character or scan the End of Message barcode. |
Green blinking | High/high beeps | ADF criteria or action is expected. Enter another criteria or action or scan the Save Rule barcode. |
Green | High/low/low beeps | All criteria or actions cleared for current rule, continue entering rule. |
Green; turns off after blinking. | High/low/high/low beeps | Rule saved. Rule entry mode exited. |
Red | Long low/long high beeps | Rule error. Entry error, wrong barcode scanned, or criteria/action list is too long for a rule. Re-enter criteria or action. |
Green | Low beep | Deleted last saved rule. The current rule is left intact. |
Green | Low/high/high beeps | All rules deleted. |
Red | Long low/long high/long low/long high beeps | Out of rule memory. Erase some existing rules, then try to save rule again. |
Green; turns off after blinking. | Long low/long high/long low beeps | Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry. |
Host Specific (USB only) | ||
None | Four high beeps | Scanner has not completed initialization. Wait several seconds and scan again. |
Host Specific (RS-232 only) | ||
Red | Low/low/low/extra low beeps | RS-232 receive error (parity error). |
None | High beep | A <BEL> character is received when Beep on <BEL> is enabled (Point-to-Point mode only). |
123Scan only (When in use, the utility controls the scanner LED). | ||
Green (slow blinking) | None | Scanner connected to 123Scan. |
Red (fast blinking) | None | File being transferred to the scanner (parameters and firmware). |
Red (slow blinking) | None | Firmware being activated on the scanner, loaded into memory. |
Green (solid) | None | Programming completed successfully (parameters and firmware). |
Red (solid) | None | Error state. |
SMS only | ||
Red (blinking) | None | Loading the SMS package to scanner. |
Maintenance Indications | ||
Red (stays on) | High/high beeps | Enter Bootloader. |
Red (blinking) | None | Firmware installation. |
Macro PDF | ||
None | Low/low beeps | Buffered File ID error. A barcode not in the current MPDF sequence was scanned. |
None | Long low/long low beeps (2 long low beeps) | File ID error. A barcode not in the current MPDF sequence was scanned. |
None | Long low/long low/long low beeps (3 long low beeps) | Out of memory. There is not enough buffer space to store the current MPDF symbol. |
None | Long low/long low/long low/long low beeps (4 long low beeps) | Bad symbology. Scanned a 1D or 2D barcode in an MPDF sequence, a duplicate MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal MPDF field. |
None | Long low/long low/long low/long low/long low beeps (5 long low beeps) | Flushing MPDF buffer. |
None | Fast warble | Aborting MPDF sequence. |
None | Low/high beeps | Flushing an already empty MPDF buffer. |
