1. DS5502 Fixed Mount Scanner Product Reference Guide
  2. Intelligent Document Capture (Hand-Held Mode Only)
  3. Quick Start
  4. IDC Demonstrations
  5. Free-Form Mode Demo
  • DS5502 Product Reference Guide
Free-Form Mode Demo
Free-Form Mode Demo

Free-Form Mode Demo

Free-Form mode captures an image where a rectangular border on the page determines the size and position. It adjusts the image to the upright orientation if a barcode is found and decoded in the image.
  • Set IDC Operating Mode to
    Free-Form
    .
  • Pull the trigger. The scanner decodes the barcode and captures an image of the entire rectangle, including the contents.
  • Modify the values for height, width, x, and y. Pull the trigger. Note that the captured image is not affected.
  • Rotate the form clockwise so the word
    Capture
     is along the bottom edge, and pull the trigger. The scanner decodes the barcode and captures the same image, including orientation. (This example also works with the form rotated counterclockwise or upside down).
  • Cover the barcode with a small piece of paper and pull the trigger. The scanner does not decode the barcode and does not re-orient the captured image to the normal position, i.e., with the logo in the upper-left corner.