1. DS5502 Fixed Mount Scanner Product Reference Guide
  2. Using the Device
  3. Using the 3-in-1 Multi-Mount
  4. Mounted Presentation Stand
  • DS5502 Product Reference Guide
Mounted Presentation Stand
Mounted Presentation Stand

Mounted Presentation Stand

You can mount the presentation stand to a tabletop.
  1. Attach the cable to the scanner.
    Use the 90-degree cable when the device is tabletop-mounted.
  2. Remove the wide base from the 3-in-1 multi-mount. For more information, go to Removing the Wide Base.
  3. Position the wide base on a flat tabletop surface.
  4. Insert a #6 wood screw (not provided) through each screw hole, and then tighten the screws to secure the wide base to the tabletop.
  5. Pivot and slot (1) the narrow base into the notch (2) of the wide base, and then fully lower the narrow base into the wide base.
  6. Using a Philips-head screwdriver, tighten the wide base screw to fasten the narrow base to the wide base.
  7. Mount the scanner onto the top swivel plate.