1. DS5502 Fixed Mount Scanner Product Reference Guide
  2. Using the Device
  3. Using the 3-in-1 Multi-Mount
  4. Monitor Mount
  • DS5502 Product Reference Guide
Monitor Mount
Monitor Mount

Monitor Mount

This section describes how to mount the 3-in-1 multi-mount to a monitor.
  1. Attach the cable to the scanner. For more information, go to Connecting the Cable.
    Use the 90-degree cable when the device is monitor-mounted.
  2. Remove the wide base from the 3-in-1 multi-mount. For more information, go to Removing the Wide Base.
  3. Widen the main arm and set it atop the monitor, with the hook oriented toward the front and the base toward the back.
    1. Optionally, you can first apply the Zebra-provided adhesive tape to the inside of the arm or on the top of the monitor to enhance grip.
  4. Gently close the main arm until it firmly grips the monitor.
  5. Mount the scanner onto the top swivel plate, and then orient the scanner window to face down as needed.
    Adhesive cable clamps (not provided) are recommended for cable management.