To mount the scanner so it is flush with the counter using the Bucket Mount:
Cut a hole in the countertop at the desired scanner location, measuring 6.26 in. (159 mm) square.
With a router set to a depth of 1.27 mm (0.05 in.), route the opening with routing dimensions of 188 mm x 201 mm (7.40 in. x 7.91 in.), with the longer dimension perpendicular to the product flow. The corner radius should not exceed 5.3 mm (0.21 in.). Ensure the routed feature is concentric with the inside square cutout.
Place the Bucket Mount into the hole.
Place the scanner on the counter near the bucket.
Route the cables from beneath the hole and attach to the scanner.
Use the lift handles to lower the scanner into the bucket.
Install the platter.
The arrows on the bucket and the platter must align (face in the same direction).
