1. SP72 Single Plane Scanner Product Reference Guide
  2. Custom Tone Introduction
  3. Downloading a Custom Tone via Scanner SDK Sample Application
  • SP72 Product Reference Guide
Downloading a Custom Tone via Scanner SDK Sample Application

Downloading a Custom Tone via Scanner SDK Sample Application

Download a custom audio file to the imager using the Scanner SDK C++ Sample Application. The user-defined tone is represented by a unique attribute number.
  1. Place the imager in SNAPI USB communication mode by scanning Symbol Native API (SNAPI) with Imaging Interface.
  2. Ensure the imager is disconnected from the host PC.
  3. To launch the
    Scanner SDK C++ Sample Application
    , on the host PC select
    Start > Scanner > Scanner SDK > C++ Sample Application.
    Scanner SDK C++ Sample Application
    Main screen for the Scanner SDK C++ Sample Application
  4. Connect the imager to a USB port on the PC and wait for the power-up tone.
  5. Verify imager is operational by touching the trigger to turn on illumination.
  6. Select
    Discover Scanners
    in the SDK application. The imager appears in the Connected Scanners list.
  7. Select the
    Advanced
     tab
  8. In the
    Custom Good Decode Tone
     section of the window, select Browse.
  9. Select the WAV file to download. Ensure the file does not exceed 65 kB.
  10. Select
    Upload
    . After a few seconds the status bar on the bottom of the window displays
    UPDATE_AUDIO_FILE - Command Success.
  11. Scan the
    Scan Tone 6
    barcode via the parameter Scan Tone .
  12. Scan a barcode (see Sample Barcodes) to verify that the imager sounds the downloaded scan tone.