Attach the modular connector of the IBM 46XX interface cable to the host port as described in Installing Cables.
Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
Optionally connect a hand-held auxiliary scanner to the aux port.
If connecting an auxiliary scanner, connect the power supply to the power port and an AC outlet.
The scanner automatically detects the host interface type, but there is no default setting. Scan the appropriate barcode from Port Address to select the port address.
To modify any other parameter options, scan the appropriate barcodes in this guide.
The only required configuration is the port address. The IBM system typically controls other scanner parameters.
