1. SP72 Single Plane Scanner Product Reference Guide
  2. Connecting an Auxiliary Scanner
  3. Using Auxiliary Scanners
  4. Using a Zebra Scanner as an Auxiliary Scanner
  • SP72 Product Reference Guide
Using a Zebra Scanner as an Auxiliary Scanner

Using a Zebra Scanner as an Auxiliary Scanner

Provides information as to the use of Zebra Auxiliary Scanner
When the
SP72
 powers up, it automatically configures the auxiliary scanner host type to be the same as the
SP72
 host type. This feature is supported by Zebra scanners that support RSM commands. Some Zebra scanners, such as the LS1203 and older LS2208s, do not support this feature. (Refer to Using a Zebra Scanner That Does Not Support RSM Commands as an Auxiliary Scanner.) All of the other auxiliary scanner settings and user parameters remain as is.
An auxiliary cordless scanner, such as the LI4278, LS4278, or DS6878, can be attached to the
SP72
. If a presentation cradle is used with any of these scanners, a separate cradle power supply (12VDC) is required. If a standard cradle is used with the DS6878, a separate cradle power supply (5VDC) is required.